What is a Chilipepper?

Works with ANY Water Heater... Even Tankless Water Heaters!

Saving Time, Saving Water and Saving Energy = Saving Money!

Easy Installation - Connects with Hoses - No Plumbing or Soldering Needed!

Powerful! One Small Pump Can Work for an Entire House!

 

What is the Chilipepper?

The Chilipepper Hot Water Recirculation Pump is a small appliance that quickly circulates the hot water from the water heater to your sink or shower without wasting any water down the drain. A simple touch of a button activates the Chilipepper and once the on-board temperature sensor detects sufficiently hot water it turns itself off! Voila! You've got hot water with practically no wait and zero waste. 

Almost Instant Hot Water!

The Chilipepper eliminates the need to run the faucet for several minutes to get hot water. Upon activation, the high-power pump circulates the water from the water heater - whether thankless, tank-type or other - to the faucet. And there's no need to even open the faucet but if you need to use the water while the pump is running, No Problem! The sink and faucet still work the same as before. Best of all, there's no fuss! When the hot water arrives, the Chilipepper turns itself off, leaving you free to just enjoy your hot water.

Eliminate Waste - Save Water!

The Chilipepper recirculates the cool water from the hot water line back to the water heater to be reheated instead of running it down the drain. Eliminating that wasted water saves thousands of gallons of water every year. A typical family of 4 can save over 12,000 gallons of water per year! Not running that water down the drain reduces the amount of sewage that needs to be treated as well!

Chilipepper pumps hot water from the water heater and returns it back to the water heater using the cold water line

Go Green!

The Chilipepper is a Green product because, in addition to saving water, it uses less than $2 in electricity per year to operate. Conserve Water, Energy, and Reduce your Carbon Footprint while Saving Time and Money!

One of our customers commented:

"This system is easy to install, requires no maintenance, and should be mandatory in all new construction. It will be for our clients...
Although this product has a funny name, it is a great performer."   

 

Works with Any Type of Water Heater!

The Chilipepper works with any kind of water heater at all, from a traditional tank-type water heater to solar and even oil-fired boiler type heaters. The Chilipepper even works with tankless water heaters!  In fact, the Chilipepper greatly improves the convenience of tankless water heaters, which provide endless hot water but with and incredibly long wait! Water Heater manufacturers Bosch and Rinnai have both tested the Chilipepper system and approved it for use with their tankless water heaters.

Easy Installation!

Designed for the Do-It-Yourselfer, the Chilipepper is easy to install even by the most novice homeowner. It is designed to sit or mount under a sink and connect to your water supply with flexible stainless steel hoses - so it doesn't require any alterations to your existing plumbing. The Chilipepper comes with everything you need to install it, except for 2 lengths of stainless steel flexible hose which are readily available at any hardware store. Please take a look at the installation instructions to see just how simple the installation is. The installation instructions can be viewed from the menu above.

Rebates!

Many water companies offer rebates for customers who install hot water recirculation systems like the Chilipepper - some as much as $200! That would be like getting a Chilipepper for FREE! Check with your local water company to see if they have any rebate programs.